Check the battery mounting bolt on the bracket to see if the battery mounting bolt on the bracket is tight. Unreliable mounting can damage the bracket housing due to vibration. Do not place metal on the battery of an electric forklift to avoid short circuit. Always check whether the connection between electrode and terminal is reliable. Protective agents such as vaseline can be used to prevent end oxidation. Do not use short circuit tests to check battery power for battery damage. Regular Lead acid battery should be regularly added with distilled water. Dry Batteries should be recharged before use. It is not possible to replenish distilled water if necessary. Remember, do not replace pure water or special liquids with mineral water when Lithium batteries are lost. When the lithium battery electrolyte is insufficient, the electric forklift battery routine maintenance should add the pure water. But sometimes lithium battery electrolyte will be damaged because of the battery cover or the liquid plug button is not tight and lost, resulting in lithium battery electrolyte leakage. But some drivers in the inspection of liquid level often do not pay attention to distinguish between electrolyte loss or other causes of electrolyte loss.

Electric forklift battery, as long as the electrolyte Shell undulation obviously will cause the lithium electrolyte leakage movement, not only with the plate and air direct contact, oxidation will further cause. If the electrode is oxidized, a large crystal of lead sulfate appears at the top of the electrode, leading to vulcanization. Spraying electrolyte on the surface of battery cover or battery cover can lead to corrosion of the Lead acid battery and self-discharge. If there are a lot of impurities around the electrolyte, local battery will lead to self-discharge plate, good use is very important. Therefore, we need to always pay attention to whether the battery rack is strong and loose, check the ratio, with the inhalation scale to check the ratio. Do not knock over the electrolyte and wear protective equipment during operation. Consult a professional, especially when replenishing electrolyte (dilute sulfuric acid) . Electrolyte leakage should be dealt with immediately (see emergency treatment) the operation of the end-of-life battery: As the battery life is approaching the end of a single battery electrolyte rapidly reduced, should be added daily distilled water. For the waste battery, take out the electrolyte to decompose the battery. Battery Manufacturers can discuss recycling.